沃辛頓LS6000有一款入門級自動控制的液氮供給系統LS6000AT，沃辛頓液氮罐在2016年后推出一款LS6000-CS，在此我們對比兩款的異同點。

控制功能項	CS100控制器	AUTO-TEND
產品圖片
控制面板	有	有
自動灌充	有	有
灌充開關顯示	有	有
高溫報警	有
低溫報警	有	有
遠程報警	有
傳感器感應失敗報警	有
報警失效提示	有
**遙控調試	有
液氮供給中斷報警	有
加電自檢報警	有
熱電偶校準報警	有
開蓋時間過長報警	有
2通道網絡線數據接口	有
接電腦/記錄/打印	有
溫度控制	有
數據自動儲存記錄	有
手動除霧	有
自動除霧	有

為了確保LS系列的正確運行和保持優良性能，CS100應遵循常規的維護計劃。這將包括以下內容：

Display Brightness  LS SERIES V0.5 Firmware SER 12345 Serial Number

To ensure proper operation and maintain excellent performance of the LS SERIES, a regular maintenance schedule should be followed for the CS100. This would include the following: 

CS100控制系統

檢查是否暴露于濕氣、磨損、連接器問題和面板或按鈕損壞。此外，定期固件更新可能是重要的。

CS100 CONTROL SYSTEM 

Examine for exposure to moisture, wear and tear, connector problems, and damage to the faceplate or buttons. In addition, periodic firmware updates may be important.

電磁閥

檢查電線和連接器是否損壞。每2年更換一次。液位傳感器總成，檢查電線和連接器的損壞情況。更換每2年熱電偶組件檢查損壞電線和連接器。

Solenoid Valve 

Examine wires and connector for damage. Replace every 2 years. Level Sensor Assembly 

Examine for damage to wires and connector. Replace every 2 years  Thermocouple Assembly Examine for damage to wires and connector

電源

對電源和電源線損壞的檢查

此外，還應對冷凍機及其機械部件進行檢查和預防性維護。詳情請參閱業主手冊。

Power Supply 

Examine for damage to power supply and power cords

In addition, inspection and preventive maintenance should also be performed on the freezer and its mechanical parts. Refer to owner’s manual for details. 

如果觀察到或懷疑冷凍系統的任何間歇操作，即使在正常維護計劃之外，也應立即進行調查和補救。

如果LS系列液氮罐出現問題或出現效率不高的情況，請供應商尋求幫助。CS100已納入*診斷工具，以協助識別和糾正可能出現的任何問題。

If any intermittent operation with the Cryostorage System is observed or suspected, it should be investigated and remedied immediay even if this falls outside of the normal maintenance schedule。

If the LS SERIES freezer experiences problems or appears that it is not operating at optimum efficiency, please contact your supplier for assistance. The CS100 has incorporated state of the art diagnostic tools to assist in the identification and correction of any issues that may arise。